1. Welding conditions

General connector products are welded to the circuit board for use. With the popularity of wave soldering technology, the welding applicability of butt plug has put forward new requirements. All ECOMTOP products achieve or exceed...

2. Surface plating

Introduction: the hardware part of the connector usually requires the surface plating of tin, gold, nickel, etc. The unique and excellent technology of Taiwan's electroplating industry has always been the basic guarantee for the superiority of Taiwanese connectors. Each product provided by ECOMTOP...

3. Hardware material

Brief introduction: connector hardware material performance determines the connector contact point elastic performance, is the key factor of connector quality. Many connectors need to be plugged in and out frequently and require good contact elasticity. ECOMTOP products are mostly made of...

4. Plastic material

Introduction: the connector products mainly use engineering plastics such as P.B.T, P.V.C, P.P.S, L.C.P and NYLON66. The use of fine plastic material ensures that the connector will work normally within the designed temperature range for a long time.

5. Spacing

Description :(PITCH) -- usually refers to the center distance between two adjacent horizontal insertion points (pins) in the connector product. This is in millimeters (MM). Is the most important industrial connector product is also...

6. Insulation impedance

The impedance value of the insulator between the Insertion resistance terminals.

7. Insertion force

The force required to insert a male Insertion force into the female socket.

8. Polarity

Introduction: the alignment of Polarization terminals and leads that prohibit inappropriate coupling of plugs and sockets.

9. Brine spray test

Introduction: Slective Plating (salt spray test) : a testing with hair connector Plating or corrosive gas tightness test.

10. Pull out the force

The amount of force required to Withdraw a lead from one end must generally be at least 0.5 ounce.